Brake Warning Light Circuit (Remains On)

BRAKE WARNING LIGHT CIRCUIT (REMAINS ON)

CIRCUIT DESCRIPTION
If any of the following is detected, the BRAKE warning light remains on:
- The skid control ECU connector is disconnected from the skid control ECU.
- The combination meter connector is disconnected from the combination meter assembly.
- The brake fluid level is insufficient.
- The parking brake is applied.
- The EBD is defective.
- There is a malfunction in the skid control ECU internal circuit.

Wiring Diagram (Part 1):

Wiring Diagram (Part 2):

Step 1-4:

Step 5-7:

Step 8-9:

Step 10-11:

Step 12:

INSPECTION PROCEDURE

NOTE: When replacing the ABS & TRACTION actuator assembly, perform zero point calibration. Calibration