Air-Fuel Ratio Sensor
AIR FUEL RATIO SENSORREPLACEMENT
1. REMOVE AIR FUEL RATIO SENSOR
a. Disconnect the 2 air fuel ratio sensor connectors.
b. Remove the 2 air fuel ratio sensors from the front pipe assembly.
SST 09224-00010
2. INSTALL AIR FUEL RATIO SENSOR
a. Install the 2 air fuel ratio sensors to the front pipe assembly.
SST 09224-00010
Torque:
44 N.m (449 kgf.cm, 32 ft.lbf)
40 N.m (408 kgf.cm, 30 ft.lbf) (with SST)
NOTE: Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).
b. Connect the 2 air fuel ratio sensor connectors.