Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2006 >> Avalon V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Variable Valve Timing Actuator Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Variable Valve Timing Actuator Position Sensor: Service and Repair

REPLACEMENT

1. REMOVE V-BANK COVER SUB-ASSEMBLY
2. REMOVE VVT SENSOR




a. Intake camshaft (Bank 1).
1. Disconnect the VVT sensor connector.
2. Remove the bolt and the VVT sensor.




b. Exhaust camshaft (Bank 1).
1. Remove the windshield wiper link assembly
2. Remove the cowl top outside panel front
3. Disconnect the VVT sensor connector.
4. Remove the bolt and the VVT sensor.




c. Exhaust camshaft (Bank 2).
1. Disconnect the VVT sensor connector.
2. Remove the bolt and the VVT sensor.




d. Intake camshaft (Bank 2).
1. Disconnect the VVT sensor connector.
2. Remove the bolt and the VVT sensor.

3. INSTALL VVT SENSOR




a. Intake camshaft (Bank 2).
1. Install the sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)

2. Connect the VVT sensor connector.




b. Exhaust camshaft (Bank 2).
1. Install the sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)

2. Connect the VVT sensor connector.




c. Exhaust camshaft (Bank 1).
1. Install the sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)

2. Connect the VVT sensor connector.
3. Install the cowl top outside panel front
4. Install the windshield wiper link assembly




d. Intake camshaft (Bank 1).
1. Install the sensor with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)

2. Connect the VVT sensor connector.

4. INSTALL V-BANK COVER SUB-ASSEMBLY
pro multis · About Operation CHARM