Air Bag System

DTC B1610/13 FRONT AIRBAG SENSOR (RH) MALFUNCTION

CIRCUIT DESCRIPTION

DTC Detecting Condition:

The front airbag sensor RH consists of the diagnostic circuit, the frontal deceleration sensor, etc.

If the airbag sensor assy center receives signals from the frontal deceleration sensor, it determines whether or not the SRS should be activated.

DTC B1610/13 is recorded when a malfunction is detected in the front airbag sensor RH circuit.

Wiring Diagram:

Step 1:

Step 2-3:

Step 4-5:

Step 6-7:

Step 8-9:

Step 10-11:

INSPECTION PROCEDURE

CAUTION: Be sure to perform the following procedures before troubleshooting to avoid unexpected airbag deployment.

a. Turn the ignition switch to the LOCK position.
b. Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.
c. Disconnect the connectors from the airbag sensor assy center.
d. Disconnect the connectors from the horn button assy.
e. Disconnect the connector from the front passenger airbag assy.
f. w/ Side and curtain shield airbag: Disconnect the connector from the front seat airbag assy LH.
g. w/ Side and curtain shield airbag: Disconnect the connector from the front seat airbag assy RH.
h. w/ Side and curtain shield airbag: Disconnect the connector from the curtain shield airbag assy LH.
i. w/ Side and curtain shield airbag: Disconnect the connector from the curtain shield airbag assy RH.
j. Disconnect the connector from the front seat outer belt assy LH.
k. Disconnect the connector from the front seat outer belt assy RH.