Multi-Display
REMOVAL1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
3. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
a. Remove the 6 bolts.
b. Disconnect the connectors and remove the integration control and panel assembly.
4. REMOVE MULTI-DISPLAY
a. Remove the 7 bolts and the multi-display controller bracket A.
b. Remove the 7 bolts and the multi-display controller bracket B.
INSTALLATION
1. INSTALL MULTI-DISPLAY
a. Install the multi-display controller bracket B with the 7 bolts.
b. Install the multi display controller bracket A with the 7 bolts.
2. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
a. Connect the connectors.
b. Install the integration control and panel assembly with the 6 bolts.
3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal.