Clock: Testing and Inspection

ON-VEHICLE INSPECTION

1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY
a. Disconnect the A10 connector.








b. Measure the voltage according to the value(s) in the table.




c. Measure the resistance according to the value(s) in the table.


HINT: If the value is not as specified, replace the integration control & panel assembly.

2. INSPECT MULTI-DISPLAY
a. Disconnect the M3 connector.








b. Measure the voltage according to the value(s) in the table.




c. Measure the resistance according to the value(s) in the table.


HINT: If the value is not as specified, replace the multidisplay.