Differential Mount: Service and Repair

DIFFERENTIAL MOUNT CUSHION

Components:

REMOVAL
1. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY





2. REMOVE NO. 1 REAR DIFFERENTIAL MOUNT CUSHION
a. Using SST, remove the No. 1 rear differential mount cushion.
SST 09570-24011, 09316-12010

NOTICE:
^ Do not bring SST into contact with the subframe.
^ Do not slant the bolts of SST.
^ Do not set the SST in wrong direction.
^ Screw the 2 bolts of SST equally into the 2 holes of the rear differential mount.

HINT: Perform this operation only when the No. 1 rear differential mount cushion is damaged.





3. REMOVE NO. 2 REAR DIFFERENTIAL MOUNT CUSHION
a. Using SST, remove the No. 2 rear differential mount cushion.
SST 09570-24011, 09316-12010

NOTICE:
^ Do not bring SST into contact with the subframe.
^ Do not slant the bolt of SST.
^ Do not set the SST in wrong direction.

HINT: Perform this operation only when the No. 2 rear differential mount cushion is damaged.

INSTALLATION





1. INSTALL NO. 1 REAR DIFFERENTIAL MOUNT CUSHION
a. Using SST, install a new No. 1 rear differential mount cushion.
SST 09570-24011, 09316-12010

NOTICE: Do not set the SST, in wrong direction.

HINT: Perform this operation only when the No. 1 rear differential mount cushion is replaced.





2. INSTALL NO. 2 REAR DIFFERENTIAL MOUNT CUSHION
a. Using SST, install a new No. 2 rear differential mount cushion.
SST 09570-24011, 09316-12010

NOTICE: Do not set the SST, install a new No. 2 rear differential mount cushion.

HINT: Perform this operation only when the No. 2 rear differential mount cushion is replaced.

3. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY