Rear Wiper Motor

INSPECTION




1. REAR WIPER MOTOR ASSEMBLY

a. Operation Check
1. Connect the positive (+) lead from the battery to terminal 1 (+B) and the negative (-) lead to terminal 3 (LS), and check that the motor operates.

NOTE: The body earth should be connected.




b. Automatic Stop Position Operation Check
1. Connect the positive (+) lead from the battery to terminal 1 (+) and the negative (-) lead to terminal 3 (LS).

NOTE: The body earth should be connected.

2. With the motor being rotated, disconnect terminal 1 (+B) and terminal 3 (LS) to stop the motor operation at any position except the automatic stop position.
3. Connect the positive (+) lead from the battery to terminal 1 (+B), and check that the motor is restarted and automatically stopped.

NOTE: The body earth should be connected.