Sliding Roof Housing

ON-VEHICLE INSPECTION




1. INSPECT SLIDING ROOF GLASS ALIGNMENT
a. Start the engine and check the operation time of the sliding roof.
Operation time: Approx. 6 secs.

b. Check for abnormal noise or binding during operation.
c. With the sliding roof fully closed, check for water leakage.
d. Check for a difference in level between the sliding roof weatherstrip and roof panel.
Front end:
0 - 2.0 mm (0 - 0.079 in.)
0 + 1.0 mm (0 + 0.039 in.)

Side end:
0 ± 1.5 mm (0 ± 0.059 in.)

Rear end:
0 - 1.0 mm (0 - 0.039 in.)
0 + 2.0 mm (0 + 0.079 in.)