Variable Valve Timing Actuator: Service and Repair

Camshaft Timing Oil Control Valve Assembly:

REMOVAL

1. REMOVE THROTTLE BODY COVER
2. REMOVE INTAKE AIR CONNECTOR
3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY




a. Disconnect the 2 camshaft oil control valve connectors.
b. Remove the bolt, camshaft oil control valve and Oring.

Torque: 7.5 N.m (76 kgf.cm, 66 in.lbf)

c. Remove the O-ring from the each camshaft oil control valve.

HINT: At the time of installation, please refer to the following items. Use a new O-rings.

INSTALLATION
Installation is in the reverse order of removal.