For Vehicles Equipped With Vehicle Stability Control (VSC) System

FOR VEHICLES EQUIPPED WITH VEHICLE STABILITY CONTROL (VSC) SYSTEM




a. Notices when using drum tester
1. When using a drum tester, be sure to start the engine with the ignition switch OFF, and connect SST to the terminals TS and CG of the DLC3 before the measurement in order to cancel the VSC operation.

SST 09843-18040

NOTE:
- Confirm that the VSC warning light blinks.
- The VSC system is reset when the engine is restarted.
- Fasten the vehicle with lock chains.

b. Notice of related operations to VSC
1. Do not carry out unnecessary installation and removal as it might disorder the adjustment of the parts related to the VSC.
2. Be sure to carry out the preparation for operation and the confirmation of operation completion accordance with the instructions of the text and when the operations related to the VSC are performed.