Crankshaft, Engine

Crankshaft Bearing Cap Bolt Inspection
Standard Diameter 10.0 to 10.2 mm (0.393 to 0.402 inch)

Crankshaft
Main Journal
Diameter 71.988 to 72.000 mm (2.8342 to 2.8346 inch)
Maximum Taper & Out-of-Round 0.02 mm (0.0008 inch)
Maximum Circle Runout 0.06 mm (0.0024 inch)
Crank Pin
Diameter 55.992 to 56.000 mm (2.2044 to 2.2047 inch)
Maximum Taper & Out-of-Round 0.02 mm (0.0008 inch)
Thrust Clearance
Standard 0.04 to 0.24 mm (0.0016 to 0.0094 inch)
Maximum 0.30 mm (0.0118 inch)
Main Bearing Oil Clearance
Standard 0.018 to 0.030 mm (0.0007 to 0.0012 inch)
Maximum 0.046 mm (0.0018 inch)

Journal Bearing:

Crankshaft Main Bearing Size Codes





Main Bearing Cap Lower Bolts
First Pass 61 Nm (622 kgf-cm, 45 ft. lbs.)
Final Pass 90°





Main Bearing Cap Side Bolts 25 Nm (255 kgf-cm, 18 ft. lbs.)