Double Cab

INSPECTION







1. INSPECT DRIVER DOOR KEY LOCK AND UNLOCK SWITCH CONTINUITY
If the continuity is not as specified, replace the door lock assembly.







2. INSPECT PASSENGER SIDE DOOR KEY LOCK AND UNLOCK SWITCH CONTINUITY
If the continuity is not as specified, replace the door lock assembly.







3. INSPECT DRIVER SIDE DOOR UNLOCK DETECTION SWITCH CONTINUITY
If the continuity is not as specified, replace the door lock assembly.







4. INSPECT PASSENGER SIDE DOOR UNLOCK DETECTION SWITCH CONTINUITY
If the continuity is not as specified, replace the door lock assembly.







5. INSPECT REAR LEFT DOOR UNLOCK DETECTION SWITCH CONTINUITY
If the continuity is not as specified, replace the door lock assembly.







6. INSPECT REAR RIGHT DOOR UNLOCK DETECTION SWITCH CONTINUITY
If the continuity is not as specified, replace the door lock assembly.




7. INSPECT DRIVER SIDE DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the door lock cable moves to the UNLOCK position.
b. Reverse the polarity and check that the door lock cable moves to the LOCK position.
If operation is not as specified, replace the door lock assembly.




8. INSPECT PASSENGER SIDE DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 5 and the negative (-) lead to terminal 6, and check that the door lock cable moves to the UNLOCK position.
b. Reverse the polarity and check that the door lock cable moves to the LOCK position.
If operation is not as specified, replace the door lock assembly.




9. INSPECT REAR LEFT SIDE DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 4, and check that the door lock cable moves to the UNLOCK position.
b. Reverse the polarity and check that the door lock cable moves to the LOCK position.
If operation is not as specified, replace the door lock assembly.




10. INSPECT REAR RIGHT SIDE DOOR LOCK MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 4, and check that the door lock cable moves to the UNLOCK position.
b. Reverse the polarity and check that the door lock cable moves to the LOCK position.
If operation is not as specified, replace the door lock assembly.