Light Auto Turn Off System Without DRL

System Outline

With the ignition SW turned on, the current flows to TERMINAL 9 of the integration relay through ECU IG fuse. Voltage is applied at all times to TERMINAL 6 of the integration relay through the TAIL fuse, and through the H-LP relay coil side.

1. Normal Lighting Operation


With the light control SW turned to TAIL position, a signal is input into the integration relay. Due to this signal, the current flowing to TERMINAL 6 of the relay flows to TERMINAL 14 of the light control SW to TERMINAL 16 to GROUND, and taillights to turn on.


With the light control SW turned to HEAD position, a signal is input into the integration relay. Due to this signal, the current flowing to the relay flows to TERMINAL 13 of the light control SW to TERMINAL 16 to GROUND in the headlight circuit, and causes taillight and H-LP relay to turn the lights on. The taillight circuit is same as above.

2. Light Auto Turn Off Operation
With light on and ignition SW turned off (Input signal goes to TERMINAL 9 of the relay), when the driver's door is opened (Input signal goes to TERMINAL 14 of the relay), the relay operates and the current is cut off which flows from TERMINAL 6 and through the H-LP relay coil side of the relay to taillight circuit and headlight circuit.
As a result, all lights are turned off automatically.