Wiper and Washer Without INT Time SW

System Outline

With the ignition SW turned on, current flows to TERMINAL 17 of the wiper and washer SW, TERMINAL 3 of the washer motor and TERMINAL 2 of the wiper motor through the WIP fuse.

1. Low Speed Position
With wiper SW turned to LOW position, current flows from TERMINAL 17 of the wiper and washer SW to TERMINAL 7 to TERMINAL 5 of the wiper motor to TERMINAL 4 to GROUND and causes the wiper motor to run at low speed.

2. High Speed Position
With wiper SW turned to HIGH position, current flows from TERMINAL 17 of the wiper and washer SW to TERMINAL 8 to TERMINAL 3 of the wiper motor to TERMINAL 4 to GROUND and causes the motor to run at high speed.

3. Mist Position
With the wiper SW turned to MIST position, current flows from TERMINAL 17 of the wiper and washer SW to TERMINAL 7 to TERMINAL 5 of the wiper motor to TERMINAL 4 to GROUND and causes the wiper motor to run at low speed.

4. Washer Interlocking Operation
With the washer SW turned to on, current flows from TERMINAL 3 of the washer motor to TERMINAL 4 to TERMINAL 11 of the wiper and washer SW to TERMINAL 2 to GROUND and causes to the washer motor to run, and the window washer is jetted.