Turn Signal Flasher: Service and Repair
REMOVAL1. REMOVE FRONT DOOR SCUFF PLATE LH
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH
3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH
4. REMOVE STEERING COLUMN COVER
5. REMOVE NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY
6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Smart Key System)
7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/ Smart Key System)
8. REMOVE INSTRUMENT CLUSTER FINISH PANEL
9. REMOVE COMBINATION METER ASSEMBLY
10. REMOVE TURN SIGNAL FLASHER ASSEMBLY
a. Disconnect the connector.
b. Remove the clamp and the turn signal flasher assembly.
INSTALLATION
1. INSTALL TURN SIGNAL FLASHER ASSEMBLY
a. Install the clamp and the turn signal flasher assembly.
b. Connect the connector.
2. INSTALL COMBINATION METER ASSEMBLY
3. INSTALL INSTRUMENT CLUSTER FINISH PANEL
4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Smart Key System)
5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/ Smart Key System)
6. INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY
7. INSTALL STEERING COLUMN COVER
8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH
9. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
10. INSTALL FRONT DOOR SCUFF PLATE LH