Meter / Gauge System

METER: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. CHECK DTC





(a) Connect the intelligent tester (with CAN VIM) to the DLC3.

(b) Turn the power switch on (IG) and turn the intelligent tester on.
(c) Enter the following menus: DIAGNOSIS / OBD/MOBD / METER / DTC INFO / CURRENT CODES.
(d) Check for DTCs.
2. CLEAR DTC
(a) Connect the intelligent tester (with CAN VIM) to the DLC3.
(b) Turn the power switch on (IG) and turn the intelligent tester on.
(c) Enter the following menus: DIAGNOSIS / OBD/MOBD / METER / DTC INFO / CURRENT CODES.
(d) Erase DTCs by pressing the YES button on the tester.