From 10-2006

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: INSTALLATION

INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU





(a) Connect the connector to the tire pressure warning ECU.
(b) Install the tire pressure warning ECU with the nut.
Torque: 7.5 Nm (77 kgf-cm, 66in-lbf)
2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMC Made) Installation
3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMMK Made) Installation
4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMC Made) Installation
5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMMK Made) Installation
6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation
7. INSTALL FRONT DOOR SCUFF PLATE RH Installation
8. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL
9. PERFORM INITIALIZATION

NOTICE: Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.

10. REGISTER TRANSMITTER ID

HINT: Registration

11. INSPECT TIRE PRESSURE WARNING SYSTEM

HINT: Test Mode Procedure

12. INITIALIZE SYSTEM

NOTICE:
- Be sure to register the transmitter IDs of all tires in the ECU before initialization.
- Be sure to inflate all tires to the proper inflation pressure before initialization.

HINT: Initialization