Crankshaft, Engine

Crankshaft
Crankshaft bearing cap set bolt diameter
Standard 10.8 to 11.0 mm (0.4252 to 0.4331 inch)
Maximum 10.7 mm (0.4213 inch)
Crankshaft circle runout
Maximum 0.06 mm (0.0024 inch)
Main journal diameter 60.988 to 61.000 mm (2.4011 to 2.4016 inch)
Main journal taper and out-of-round
Maximum 0.02 mm (0.0008 inch)
Crank pin diameter 52.992 to 53.000 mm (2.0863 to 2.0866 inch)
Crank pin taper and out-of-round
Maximum 0.02 mm (0.0008 inch)
Crankshaft oil clearance
Standard 0.026 to 0.047 mm (0.0010 to 0.0019 inch)
Maximum 0.050 mm (0.0020 inch)
Crankshaft thrust clearance
Standard 0.04 to 0.24 mm (0.0016 to 0.0094 inch)
Maximum 0.30 mm (0.0118 inch)
Thrust washer thickness 2.43 to 2.48 mm (0.0957 to 0.0976 inch)