Check Mode Procedure

CHECK MODE PROCEDURE

1. LIST OF OPERATION METHODS




a. By operating each of the A/C control switches as shown in the diagram, it is possible to enter the diagnostic check mode.

2. INDICATOR CHECK




a. Turn the ignition switch to the ON position while pressing the A/C control "AUTO" switch and "R/F" switch simultaneously.




b. Check that the indicators come on and go off 4 times in succession at 1 second intervals.

HINT:
- If a navigation system is installed, the indicator will blink and the buzzer will sound.
- After the indicator check is completed, the system enters the DTC mode automatically.
- Press the "OFF" switch to cancel the check mode.