TC and CG Terminal Circuit
TC and CG Terminal CircuitDESCRIPTION
DTC output mode is set by connecting terminals 13 (TC) and 4 (CG) of the DLC3. The DTCs are indicated by the blinking of the tire pressure warning light.
Wiring Diagram:
HINT: When each warning light continues blinking, a ground short in the wiring of terminal TC of the DLC3 or an internal ground short in each ECU may have occurred.
INSPECTION PROCEDURE
NOTICE: It is necessary to register an ID code after replacing the tire pressure monitor valve and/or the tire pressure warning ECU.
