Connecting Rod Bearing

Connecting Rod Bearing
Standard bearing thickness
Mark 1 1.485 to 1.488 mm (0.0585 to 0.0586 inch)
Mark 2 1.489 to 1.491 mm (0.0586 to 0.0587 inch)
Mark 3 1.492 to 1.494 mm (0.0587 to 0.0588 inch)

Rod Bearing Cap





Check that the front mark of the connecting rod cap is facing in the correct direction.

NOTICE: Match the numbered connecting rod cap with the connecting rod.

Using a 12 mm socket wrench, tighten the bolts in several passes to the specified torque.
Torque 24.5 Nm (250 kgf-cm, 18 ft. lbs.)





Mark the front of the connecting rod bolts with paint.
Retighten the cap bolts 90° as shown in the illustration.