C1336

DTC C1336/39 Zero Point Calibration of Acceleration Sensor Undone

DESCRIPTION

DTC Detecting Conditions:

Skid control ECU receives signals from the yaw rate sensor and deceleration sensor via the CAN communication system.

The deceleration sensor is built into the yaw rate sensor.

If there is trouble in the bus lines between the yaw rate sensor and deceleration sensor and the CAN communication system, the DTCs U0123/62 (yaw rate sensor communication trouble) and U0124/95 (deceleration sensor communication trouble) are output.

These DTCs are also output when the calibration has not been completed.

Wiring Diagram:

INSPECTION PROCEDURE

HINT: When U0073/94, U0100/65, U0123/62, U0124/95 or U0126/63 are output accompanied by C1210/36 or C1336/39, inspect and repair the trouble areas indicated by U0073/94, U0100/65,U0123/62, U0124/95 or U0126/63 first.

Step 1-3:

Step 4:

Step 5-8:

Step 8(Continued):