Oil Pump, Engine

Oil Pump





Provisionally install the oil pump with the 19 bolts and 2 nuts.

NOTICE: If the vehicle is equipped with air conditioning, install bolts A' and B' when installing the idle pulley with bracket since they are for this purpose.

HINT:
Bolt length:
75 mm (2.95 inch) for bolt A, B
87 mm (3.43 inch) for bolt C
95 mm (3.74 inch) for bolt D
35 mm (1.37 inch) for bolt E

Fully tighten the bolts and nuts, except bolts A, in the following order: Area 1, Area 3 and then Area 2.
Torque 21 Nm (214 kgf-cm, 15 ft. lbs.)
Fully tighten the bolts A in the following order: Area 2 and then Area 3.
Torque 46 Nm (469 kgf-cm, 34 ft. lbs.)
Fully tighten the bolts E in Area 4.
Torque 21 Nm (214 kgf-cm, 15 ft. lbs.)