Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2007 >> Tundra 2WD V8-4.7L (2UZ-FE) >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Service and Repair >> Door Control Switch (For Front RH)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Door Control Switch (For Front RH)

Door Control Switch (for Front RH):




DOOR CONTROL SWITCH (FOR FRONT RH)

REMOVAL

1. REMOVE FRONT ARMREST UPPER BASE PANEL RH




a. Using a moulding remover, detach the 2 clips and 5 claws, and remove the armrest base panel.




b. Disconnect the door control switch connector and power window regulator connector.

2. REMOVE DOOR CONTROL SWITCH ASSEMBLY




a. Detach the 2 claws and remove the door control switch.

INSTALLATION

1. INSTALL DOOR CONTROL SWITCH ASSEMBLY




a. Attach the 2 claws to install the control switch.

2. INSTALL FRONT ARMREST UPPER BASE PANEL RH




a. Connect the door control switch connector and power window regulator connector.




b. Attach the 2 clips and 5 claws to install the armrest base panel.
pro multis · About Operation CHARM