Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2007 >> Tundra 2WD V8-4.7L (2UZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Programming and Relearning
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Programming and Relearning

SFI SYSTEM

PRECAUTION

CAUTION: When using the intelligent tester or Techstream, observe the following items for safety reasons:
- Read its instruction books before using the tester.
- Prevent the tester cable from being caught on the pedals, shift lever and steering wheel when driving with the tester connected to the vehicle.
- When driving the vehicle for testing purposes using the tester, 2 persons are required. One person drives the vehicle, and the other operates the tester.

NOTE:
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
- Perform RESET MEMORY (AT initialization) for 2WD when replacing the automatic transmission assembly, engine assembly or ECM.
- Perform RESET MEMORY (AT initialization) for 4WD when replacing the automatic transmission assembly, engine assembly or ECM.
- Perform REGISTRATION (VIN registration) when replacing the ECM. Registration

HINT: RESET MEMORY cannot be completed by only removing the battery.
pro multis · About Operation CHARM