C1370

DTC C1370/73 Engine or Transmission System Matching Error

DESCRIPTION

DTC Detection Condition:

This DTC is set by the skid control ECU when the ECM is replaced with one that has different engine and transmission information than the information stored in the skid control ECU.

This DTC is also set when the VSC actuator assembly (skid control ECU) is replaced with one that has different engine and transmission information than the information stored in the ECM.

HINT: If this DTC is output, clear the zero point calibration data and enter test mode.The system returns to normal when the correct data is received from the ECM.




INSPECTION PROCEDURE

NOTE: When replacing the VSC actuator assembly, perform zero point calibration. Calibration