DTC 39

DTC C1336/39 Zero Point Calibration of Acceleration Sensor Undone

DESCRIPTION

DTC Detection Condition:

A new skid control ECU is supplied without zero point calibration for the deceleration sensor and master cylinder pressure sensor. Until the zero points are calibrated, DTC C1336/39 remains stored. By entering test mode, the zero point calibration is automatically performed, and DTC C1336/39 is erased automatically.

Step 1-3:

Step 3(Continued)-4:

INSPECTION PROCEDURE

NOTE: When replacing the VSC actuator assembly, perform the zero point calibration. Calibration

HINT: When U0123/62, U0124/69 or U0126/63 is output together with C1336/39, inspect and repair trouble areas indicated by U0123/62, U0124/69 or U0126/63 first.