With Manufacturer's Scan Tool

1. CLEAR FOR IMMOBILISER DTC
a. Connect the intelligent tester or Techstream to the DLC3.
b. Turn the ignition switch ON.
c. Turn the tester ON.
d. Enter the following menus:
1. Intelligent tester - Select: DIAGNOSIS / OBD/MOBD / IMMOBILISER / DTC INFO.
2. Techstream - Select: Body Electrical / Immobiliser / Trouble Codes.

e. Clear the DTCs.

HINT:
- When using intelligent tester or Techstream with the ignition switch OFF to troubleshoot: Connect the intelligent tester or Techstream to the vehicle, and turn the front door courtesy light switch LH on and off at 1.5 second intervals until communication between the tester and vehicle begins.
- Refer to the intelligent tester or Techstream operator's manual for further details.

2. CLEAR FOR ECM DTC
a. Connect the intelligent tester or Techstream to the DLC3.
b. Turn the ignition switch ON.
c. Turn the tester ON.
d. Enter the following menus:
1. Intelligent tester - Select: DIAGNOSIS / ENHANCED OBD II / DTC INFO.
2. Techstream - Select: Powertrain / Engine and ECT / Trouble Codes.

e. Clear the DTCs.