Rear Seat Outer Belt Assembly (For Double Cab)

Rear Seat Outer Belt Assembly (for Double Cab):

REAR SEAT OUTER BELT ASSEMBLY (for Double Cab)

REMOVAL

HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. REMOVE REAR SEAT ASSEMBLY
a. Remove the rear seat.

2. REMOVE REAR DOOR SCUFF PLATE
3. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP




4. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY
a. Detach the 2 claws and remove the outer lap belt anchor cover.




b. Remove the bolt and seat belt anchor.




c. Detach the 6 clips and remove the quarter trim panel.

5. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY




6. REMOVE REAR SEAT OUTER BELT ASSEMBLY
a. Remove the bolt and shoulder anchor.
b. Remove the bolt and disconnect the seat belt's shoulder anchor.




c. Remove the 2 bolts and seat belt.

INSTALLATION

HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.




1. INSTALL REAR SEAT OUTER BELT ASSEMBLY
a. Align the vehicle's claws with the seat belt retractor positioning holes.
b. Install the seat belt with the 2 bolts. First install the upper bolt, and then install the lower bolt.

Torque:
for bolt A
7.5 N.m (76 kgf.cm, 66 in.lbf)
for bolt B
42 N.m (428 kgf.cm, 31 ft.lbf)




c. Install the shoulder anchor with the bolt.

Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)

2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY




3. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY
a. Attach the 6 clips to install the quarter trim panel lower.




b. Install the seat belt anchor with the bolt.

Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)




c. Attach the 2 claws to install the outer lap belt anchor cover.

4. INSTALL REAR DOOR SCUFF PLATE
5. INSTALL REAR SEAT ASSEMBLY
a. Install the rear seat.