Unlock Warning Switch

Unlock Warning Switch:

UNLOCK WARNING SWITCH

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE STEERING COLUMN COVER




3. REMOVE UN-LOCK WARNING SWITCH ASSEMBLY
a. Insert the key into the ignition key cylinder.
b. Disconnect the connector.
c. Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the unlock warning switch.

INSTALLATION




1. INSTALL UN-LOCK WARNING SWITCH ASSEMBLY
a. Engage the 2 claws and install the unlock warning switch.
b. Connect the connector.

2. INSTALL STEERING COLUMN COVER

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)