No. 3 Black Out Tape (For Sedan)

NO. 3 BLACK OUT TAPE (For Sedan)

No. 3 Black Out Tape (For Sedan):

REMOVAL

HINT: The procedure described below is for the LH side. Use the same procedure for the RH and LH sides, unless otherwise specified.





1. REMOVE NO. 3 BLACK OUT TAPE
a. Using an infrared light, heat the No. 3 black out tape.

NOTICE: Do not burn yourself with the heated front door panel or infrared light.

HINT: Heat at 40 to 60° C (104 to 140° F) for 3 to 5 minutes.

b. Lift the end portion with your nail and peel it parallel to the attachment surface.

INSTALLATION

HINT: The procedure described below is for the LH side. Use the same procedure for the RH and LH sides, unless otherwise specified.

1. INSTALL NO. 3 BLACK OUT TAPE
a. Application precautions.
b. Clean the attachment surface (Using an infrared light).
c. Clean the attachment surface (Using a tape removal disc).
d. Apply new No. 1 black out tape to the positions shown in the illustration.