Key Lock-In Prevention Function Does Not Work Properly

Key Lock-in Prevention Function does not Work Properly

DESCRIPTION
When the key is in the ignition key cylinder or the door courtesy light ON signal is output to the main body ECU, performing the door lock operation with the lock switch does not lock the doors.

HINT: Since the key reminder warning system has functions that use CAN communication, firstly confirm that there is no malfunction in the communication system by inspecting the CAN communication functions in accordance with How to Proceed with Troubleshooting. Then, conduct the given troubleshooting procedure.

Wiring Diagram:

Step 1:

Step 1(Continued)-2:

Step 3-4:

Step 4(Continued)-5:

Step 6:

INSPECTION PROCEDURE