Ignition Switch: Service and Repair

Ignition Switch:

IGNITION SWITCH

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE STEERING COLUMN COVER




a. Turn the steering wheel to the right and remove the screw indicated in the illustration.




b. Turn the steering wheel to the left and remove the screw indicated in the illustration.




c. Remove the screw indicated in the illustration and remove the steering column cover.




3. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY
a. Disconnect the connector.
b. Disengage the 2 claws and remove the ignition or starter switch assembly.

INSTALLATION




1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY
a. Engage the 2 claws and install the ignition or starter switch assembly.
b. Connect the connector.

2. INSTALL STEERING COLUMN COVER




a. Install the screw indicated in the illustration.




b. Turn the steering wheel to the left and install the screw indicated in the illustration.




c. Turn the steering wheel to the right, and install the screw indicated in the illustration.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)