Front Passenger Side Power Window Switch (For Hatchback)

FRONT PASSENGER SIDE POWER WINDOW SWITCH (For Hatchback)

Front Passenger Side Power Window Switch (For Sedan):

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE DOOR ARMREST COVER

HINT: Use the same procedure as for the LH side.





3. REMOVE FRONT ARMREST BASE PANEL UPPER
a. Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws and clip and remove the front armrest base panel upper.
b. Disconnect the connector.





4. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY
a. Disengage the 2 claws and remove the power window regulator switch.

INSTALLATION





1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
a. Engage the 2 claws and install the power window regulator switch.





2. INSTALL FRONT ARMREST BASE PANEL UPPER
a. Connect the connector.
b. Engage the 5 claws and clip and install the front armrest base panel upper.

3. INSTALL DOOR ARMREST COVER

HINT: Use the same procedure as for the LH side.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)