Front Passenger Side Power Window Switch (For Sedan)

FRONT PASSENGER SIDE POWER WINDOW SWITCH (For Sedan)

Front Passenger Side Power Window Switch (For Sedan):

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT ARMREST BASE UPPER PANEL





3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY
a. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the power window regulator switch.

INSTALLATION





1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
a. Engage the 2 claws and install the power window regulator switch.

2. INSTALL FRONT ARMREST BASE UPPER PANEL
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)