Integration Relay

Integration Relay:

INTEGRATION RELAY

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE RELAY BLOCK COVER NO.1




3. REMOVE INTEGRATION RELAY
a. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the integration relay.
b. Disconnect the 3 connectors.

INSTALLATION

1. INSTALL INTEGRATION RELAY
a. Connect the 3 connectors.
b. Attach the integration relay to the engine room relay block.

2. INSTALL RELAY BLOCK COVER NO.1
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)