Power Window Master Switch (For Hatchback)

POWER WINDOW MASTER SWITCH (For Hatchback)

Power Window Master Switch (For Hatchback):

REMOVAL

HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE DOOR ARMREST COVER
3. REMOVE FRONT ARMREST BASE PANEL UPPER





4. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
a. Remove the 3 screws and the power window regulator master switch.

INSTALLATION





1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
a. Install the power window regulator master switch with the 3 screws.

2. INSTALL FRONT ARMREST BASE PANEL UPPER
3. INSTALL DOOR ARMREST COVER
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)