Rear Power Window Switch (For Hatchback)

REAR POWER WINDOW SWITCH (For Hatchback)

Rear Power Window Switch (For Hatchback):

REMOVAL

HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY





3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY REAR
a. Disengage the set plate and remove the power window regulator switch.

INSTALLATION





1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY REAR
a. Engage the set plate and install the power window regulator switch.

2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)