Rear Power Window Switch (For Sedan)

REAR POWER WINDOW SWITCH (For Sedan)

Rear Power Window Switch (For Sedan):

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE REAR DOOR ARMREST BASE UPPER PANEL
3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY





4. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY REAR
a. Disengage the set plate and remove the power window regulator switch.

INSTALLATION





1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY REAR
a. Engage the set plate and install the power window regulator switch.

2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY
3. INSTALL REAR DOOR ARMREST BASE UPPER PANEL
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)