Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> 4 Runner 2WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation









1GR-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: INSTALLATION

1GR-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL CRANKSHAFT POSITION SENSOR
(a) Apply a light coat of engine oil to an O-ring of the crankshaft position sensor.






(b) Install the crankshaft position sensor with the bolt.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
(c) Connect the crankshaft position sensor connector.
2. INSTALL COOLER COMPRESSOR ASSEMBLY
(a) Install the cooler compressor assembly with the 4 bolts.
Torque: 25 Nm (255 kgf-cm, 18 ft-lbf)
(b) Connect the cooler compressor assembly connector.






(c) Install the suction hose sub-assembly with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
3. INSTALL ENGINE UNDER COVER ASSEMBLY REAR
(a) Install the engine under cover assembly rear with the 4 bolts.
Torque: 29 Nm (296 kgf-cm, 21 ft-lbf)
4. INSTALL GENERATOR ASSEMBLY
pro multis · About Operation CHARM