Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> 4 Runner 2WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Variable Valve Timing Actuator Position Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation









1GR-FE ENGINE CONTROL SYSTEM: VVT SENSOR: INSTALLATION

1GR-FE ENGINE CONTROL SYSTEM: VVT SENSOR: INSTALLATION

1. INSTALL VVT SENSOR
(a) LH bank side VVT sensor.





(1) Apply a light coat of engine oil to an O-ring of the VVT sensor.
(2) Install the VVT sensor with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(3) Connect the VVT sensor connector.





(4) Connect the water by-pass hoses No. 4 and No. 5.






(b) RH bank side VVT sensor.
(1) Apply a light coat of engine oil to an O-ring of the VVT sensor.
(2) Install the VVT sensor with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(3) Connect the VVT sensor connector.
2. INSTALL AIR CLEANER ASSEMBLY Installation

3. CONNECT VENTILATION HOSE NO.2
4. ADD ENGINE COOLANT Service and Repair

5. CHECK FOR ENGINE COOLANT LEAKS Service and Repair

6. INSTALL V-BANK COVER
(a) Install the V-bank cover with the 2 nuts.
Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)
pro multis · About Operation CHARM