Removal

2UZ-FE ENGINE CONTROL SYSTEM: ECM: REMOVAL

2UZ-FE ENGINE CONTROL SYSTEM: ECM: REMOVAL

1. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2

2. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY

3. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER NO.2

4. REMOVE ECM






(a) Disconnect the 5 ECM connector.
(b) Remove the 3 nuts and ECM.
(c) Remove the 2 screws and ECM bracket No. 1 from the ECM.
(d) Remove the 2 screws and ECM bracket No. 2 from the ECM.