Installation

CRUISE CONTROL MAIN SWITCH: INSTALLATION

INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH
(a) Install the cruise control main switch assembly with the 2 screws.
Torque: 2.35 Nm (24 kgf-cm, 21 in-lbf)
(b) Connect the connector.
2. INSTALL STEERING PAD Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION
NOTICE: Some systems need initialization when disconnecting the cable from the negative battery terminal
.

5. INSPECT STEERING PAD Installation

6. INSPECT SRS WARNING LIGHT
Check Mode Procedure