Removal

CRUISE CONTROL: DISTANCE CONTROL ECU: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working
Service Precautions.

2. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 1 Removal

3. REMOVE INSTRUMENT PANEL FINISH PLATE Removal

4. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY Removal

5. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL LH Removal

6. REMOVE INSTRUMENT PANEL AIRBAG ASSEMBLY LOWER NO. 1 Removal

7. REMOVE DISTANCE CONTROL ECU ASSEMBLY






(a) Disconnect the connector.
(b) Remove the bolt and the distance control ECU assembly.