Camshaft Bearing Cap

CAMSHAFT BEARING CAP RH









Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)


CAMSHAFT HOUSING SUB-ASSEMBLY RH






Install the camshaft housing RH, and tighten the 12 bolts in the order shown in the illustration.

Torque: 28 Nm (286 kgf-cm, 21 ft-lbf)

NOTICE: Make sure that the knock pins of the camshafts are positioned as shown in the illustration before installing the camshaft housing RH.





Tighten the 8 bolts in the order shown in the illustration.

Torque: 16 Nm (163 kgf-cm, 12 ft-lbf)

CAMSHAFT BEARING CAP








Temporarily tighten the 8 bolts in the order shown in the illustration.

Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)

CAMSHAFT HOUSING SUB-ASSEMBLY LH





Install the camshaft housing LH, and tighten the 13 bolts in the order shown in the illustration.

Torque: 28 Nm (286 kgf-cm, 21 ft-lbf)

NOTICE: Make sure that the knock pins of the camshafts are positioned as shown in the illustration before installing the camshaft housing LH.





Tighten the 8 bolts in the order shown in the illustration.

Torque: 16 Nm (163 kgf-cm, 12 ft-lbf)