Installation

2GR-FE STARTING: ENGINE SWITCH (w/ Smart Key System): INSTALLATION

INSTALLATION

1. INSTALL ENGINE SWITCH
(a) Install the engine switch.
(b) Connect the engine switch connector.
2. INSTALL INSTRUMENT PANEL AIR BAG ASSEMBLY LOWER NO.1
3. INSTALL INSTRUMENT PANEL FINISH LOWER PANEL LH
4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH
5. INSTALL FRONT DOOR SCUFF PLATE LH
6. CONNECT BATTERY NEGATIVE TERMINAL
7. INSPECT SRS WARNING LIGHT
HINT:
Diagnosis System

8. PERFORM INITIALIZATION
HINT:


(a) Some systems need initialization when disconnecting the battery terminal.