Road Test

CRUISE CONTROL: CRUISE CONTROL SYSTEM: ROAD TEST

ROAD TEST

1. PROBLEM SYMPTOM CONFIRMATION





(a) Inspect the SET function.
(1) Push the ON-OFF button on.
(2) Drive at the required speed (40 km/h (25 mph) or higher).
(3) Push the cruise control main switch to - (COAST)/SET.
(4) After releasing the switch, check that the vehicle cruises at the set speed.





(b) Inspect the + (ACCEL) function.
(1) Push the ON-OFF button on.
(2) Drive at the required speed (40 km/h (25 mph) or higher).
(3) Push the cruise control main switch to - (COAST)/SET.
(4) Check that vehicle speed increases while the cruise control main switch is pushed to + (ACCEL)/RES (RESUME), and that the vehicle cruises at the newly set speed when the switch is released.
(5) Momentarily (approximately 0.5 seconds) push the cruise control main switch to + (ACCEL)/RES (RESUME) and then immediately release it. Check that vehicle speed increases by approximately 1.6 km/h (1.0 mph) (Tap-up function).





(c) Inspect the - (COAST) function.
(1) Push the ON-OFF button on.
(2) Drive at the required speed (40 km/h (25 mph) or higher).
(3) Push the cruise control main switch to - (COAST)/SET.
(4) Check that vehicle speed decreases while the cruise control main switch is pushed to - (COAST)/SET, and that the vehicle cruises at the newly set speed when the switch is released.
(5) Momentarily (approximately 0.5 seconds) push the cruise control main switch to - (COAST)/SET, and then immediately release it. Check that vehicle speed decreases by approximately 1.6 km/h (1.0 mph) (Tap-down function).





(d) Inspect the CANCEL function.
(1) Push the ON-OFF button on.
(2) Drive at the required speed (40 km/h (25 mph) or higher).
(3) Push the cruise control main switch to - (COAST)/SET.
(4) When doing one of the following, check that the cruise control system is cancelled and that the normal driving mode is reset.

- Depressing the brake pedal
- Depressing the clutch pedal (Manual Transaxle)
- Moving the shift lever to any position except D (Automatic Transaxle)
- Pushing the ON-OFF button off
- Pulling the cruise control main switch to CANCEL

Reference:
Cruise control will be halted if VSC starts operation while driving.





(e) Inspect the RES (RESUME) function.
(1) Push the ON-OFF button on.
(2) Drive at the required speed (40 km/h (25 mph) or higher).
(3) Push the cruise control main switch to - (COAST)/SET.
(4) When doing one of the following, check that the cruise control system is cancelled and that the normal driving mode is reset.

- Depressing the brake pedal
- Depressing the clutch pedal (Manual Transaxle)
- Moving the shift lever to any position except D (Automatic Transaxle)
- Pulling the cruise control main switch to CANCEL

(5) After pushing the cruise control main switch to + (ACCEL)/RES (RESUME) at a driving speed of more than 40 km/h (25 mph), check that the vehicle restores the speed prior to the cancellation.