Reassembly

A245E AUTOMATIC TRANSAXLE: FORWARD CLUTCH: REASSEMBLY

REASSEMBLY

1. INSTALL INPUT SHAFT OIL SEAL RING





(a) Install the 3 input shaft oil seal rings to the input shaft sub-assembly.

NOTE: Do not spread the ring ends more than necessary.

HINT: After installing the input shaft oil seal rings, check that they move smoothly.

2. INSTALL FORWARD CLUTCH PISTON SUB-ASSEMBLY





(a) Install 2 new O-rings to the forward clutch piston sub-assembly.





(b) Coat the O-rings with ATF and press the forward clutch piston sub-assembly into the input shaft sub-assembly with the cup side up, being careful not to damage the O-ring.
3. INSTALL FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY





(a) Install the forward clutch return spring sub-assembly to the input shaft sub-assembly.
4. INSTALL FORWARD CLUTCH PISTON RETURN SPRING SHAFT SNAP RING





(a) Place SST on the forward clutch return spring sub-assembly, and compress the forward clutch return spring sub-assembly with press.
SST: 09350-32014
09351-32070
(b) Using snap ring pliers, install the forward clutch piston return spring shaft snap ring to the input shaft sub-assembly.

HINT: Be sure the end gap of the snap ring is not aligned with the spring retainer claw.

5. INSTALL FORWARD MULTIPLE DISC CLUTCH DISC





(a) Install the 4 plates and 4 forward multiple disc clutch discs in order to the input shaft sub-assembly.
Install in order:
P = Plate D = Disc F = Flange
P - D - P - D - P - D - P - D - F
(b) Install the clutch flange with the flat side facing downward.
6. INSTALL FORWARD CLUTCH FLANGE HOLE SNAP RING





(a) Using a screwdriver, install the forward clutch flange hole snap ring to the input shaft sub-assembly.
(b) Check that the end gap of forward clutch flange hole snap ring is not aligned with one of the cutouts.
7. INSPECT PISTON STROKE OF FORWARD CLUTCH (Forward Clutch)