Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2008 >> FJ Cruiser 2WD V6-4.0L (1GR-FE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation








1GR-FE ENGINE CONTROL SYSTEM: ECM: INSTALLATION

INSTALLATION

1. INSTALL NO. 1 ECM BRACKET






(a) Install the No. 1 ECM bracket with the 2 screws.
Torque: 3.0 Nm (32 kgf-cm, 28 in-lbf)
2. INSTALL NO. 2 ECM BRACKET






(a) Install the No. 2 ECM bracket with the 2 screws.
Torque: 3.0 Nm (32 kgf-cm, 28 in-lbf)
3. INSTALL ECM






(a) Install the ECM with the 3 nuts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the 5 connectors.






4. INSTALL FOUR WHEEL DRIVE CONTROL ECU (for Automatic Transmission 4WD)
(a) Install the four wheel drive control ECU with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
(b) Connect the connector.
5. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
pro multis · About Operation CHARM